BI-10402

Bioplast Threading Pliers

Unquestionably the most practical tool for making screw pits on bars in Biosafe, Bioplast, Bioflex or PTFE, whether in 1.2mm or 1.6mm (see enlarged photo).
About this item
Length 11 cm. Surgical Steel. In stock, fast shipping. European company (France). Free return ! Feel free to visit our Amazon Shop for more models.
Unquestionably the most practical tool for making screw pits on bars in Biosafe, Bioplast, Bioflex or PTFE, whether in 1.2mm or 1.6mm (see enlarged photo). Instructions for use:
– If you cut your bar yourself, use a sharp blade and not a pair of scissors, you can cut slightly bias for easier insertion into the element . – choose the notch of the clamp according to the diameter of your bar and place it at the right depth: 2mm for a 1.6mm rod, 1.5mm for a 1.2mm rod (not to the end of the notch) .
– press firmly once . – screw a metal element thoroughly onto your rod and unscrew it so as to perfect the screw pitch (be careful to place it straight so as not to create a second step of offset screw), the larger the element, the easier it is to handle.
Instructions for use:
If you cut your bar yourself, use a sharp blade and not a pair of scissors, you can cut slightly bias for easier insertion into the element
choose the notch of the clamp according to the diameter of your bar and place it at the right depth: 2mm for a 1.6mm rod, 1.5mm for a 1.2mm rod (not to the end of the notch)
press firmly once
screw a metal element thoroughly onto your rod and unscrew it so as to perfect the screw pitch (be careful to place it straight so as not to create a second step of offset screw), the larger the element, the easier it is to handle